| |
|
|
|
Double Roll Mill |
| |
|
| |
 |
|
| click
on the image to zoom |
| |
|
|
|
|
|
| |
| |
|
Overview
For more than 25 years MIKRONS
is well-known for manufacturing
durable, hi-tech and state-of-the-art
Triple and Two Roll Mills
for the process industry.
Our Two Roll Mills are designed
with many user friendly
features like durability,
compactness, ergonomic features,
ease of mobility, user friendly
operation & maintenance
and economy.
|
| |
| Compounds
may be of rubber, plastic,
polymer, or tile compound.
The mills are available in
various sizes, with bushings
or self-aligning roller bearings,
and manual or motorized nip
adjustments. The mills are
heavily constructed to mix
newer and tougher compounds
in a silent, trouble-free
manner, and are very durable
and reliable in operation.
The mills are manufactured
as per rigid international
standards with many attractive
features and options. |
| |
| Design
Highlights |
-
Special close grained
centrifugally cast,
bushings / bearings
of special wear resistant
alloy.
-
Rolls from special
chilled cast iron with
uniform wall thickness
with built in shaft.
-
Special design at necks
to withstand high impact
loads.
-
Heavy duty guides are
provided
-
Special alloy steel
connecting gears, heat
treated and hardened
for durable, long life.
|
| Optionals |
- Scraper System with
interchangeable blades
- Single or dual roller
speed
- Frequency Inverter for
Speed Control
- Heating & Cooling
System for the Rollers
- Explosion Proofing electrical
- Automatic Product Dispenser
- Solvent Dispensers
- Stainless steel hopper
- Splash tray to facilitate
cleaning
- Cleaning mode
- Reverse roller direction
- Emergency stop function
- Acrylic cover provided
for the roller
- Quiet operation due
to non-metallic gears
and timing belt drive
- Manual roll turning
for safety while cleaning
- Sealed water cooling
- Safety clutch allows
rolls to be turned for
cleaning with motor
- Safety cover shields
turning rolls
- Higher or lower friction
ratio level available.
|
| |
| |
| |
|
|
| Salient
Features |
- The rolls are electrically
heated with cartridge
heaters for optimum heat
distribution over the
entire roll surface with
temperature controllers.
- Temperature of two rolls
can be sensed individually
by a separate thermocouple
system.
- The surface of the rolls
is hard chrome plated,
ground and mirror polished.
- The drive system consists
of geared motor with variable
frequency drive.
- The Roll RPM can be
varied
- The control cabinet
is mounted on a swing
arm enabling a multitude
of position for best viewing
possibility.
- The cooling of this
roll is done by water
cooling arrangement and
water is collected in
a water collecting tank
which is at the other
end of roll shaft. This
system will help in cooling
of the rolls rapidly during
the shut down or change
over requirement.
|
|
| Application |
- Compounding and sheeting
out of rubber
- Feed mills for calendars
and extruders
- For re-mixing
- For plain compounding
and mixing
|
|
| TECHNICAL
SPECIFICATION |
| |
| Models |
DRM-6X15 |
DRM-8X18 |
DRM-10-24 |
DRM-12-36 |
DRM-15-40 |
DRM-16-42 |
| Roller
Diameter |
6"X15" |
8"X18" |
10"X24"
|
12"X36"
|
15"X40" |
16"X42" |
| Roller
Rotating Speed (rpm)
|
Slow
Roller
|
20 |
20 |
20 |
18 |
18 |
16 |
Fast Roller
|
24 |
24 |
24 |
22 |
22 |
20 |
| Motor
HP |
7.5 |
10.0 |
15.0 |
20.0 |
40.0 |
60.0 |
| Weight
of M/C(Kg) |
4 |
6 |
10 |
18 |
30 |
40 |
| Overall
Dimension |
1000X1000
|
1200X1200
|
1400X1400
|
1600X1600
|
1600X1600
|
2000X2000 |
|
| |
| |
|
|
REQUEST
FOR QUOTATION
|
|
Fields
marked with an *
are mandatory for
successful submission
|
| |
|
| |
|
|
|
|
|
|
|
| |
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
