| |
|
Overview
Our MIKRONS® Agitator
have a large, center mounted
low speed blade. They efficiently
pump large volumes of product
with little or no shear.
Agitators are most often
used to mix or blend low
viscosity products.
|
| Models
Offered |
-
Paddle Blade Agitator
- These agitators
have an axial flow blade
made of four flat paddles
inclined at 45 degrees.
The blade produces flow
parallel to the mixing
shaft.
-
Agifoil Blade Agitator
- The Agifoil Blade
Agitator consists of
three or four thin blade
elements with a slight
curvature and small
inclination from the
horizontal. The blade
elements pump large
quantities of liquid
with very low power
consumption.
-
Sweep Blade Agitator
- Sweep Blade Agitators
use anchor or helical
blades passing in close
proximity to tank walls.
They are commonly used
to scrape the walls
for uniform mixing or
to de-aerate.
|
| Design
Highlights: |
-
Sizes from laboratory
units to greater than
1000 litres
-
Tank mounted or hoist
mounted
-
Inverter, single speed,
and two speed drives
available
-
Stainless steel or
carbon steel material
of construction
-
Typically designed
for atmospheric operation,
but vacuum or pressure
designs are available
-
Electrical components
for hazardous or safe
environments
-
Jacketed and coiled
construction available
for heating and cooling
applications.
-
Available with single
motion impellers-propeller,
turbine, paddle, helical
or anchor style or with
double motion arrangements
utilizing anchor style
scraper agitator to
clean the vessel wall
and assist heat transfer
and paddle/turbine impeller
to increase product
movement and achieve
desired mixing homogeneity.
|
| |
|
|
